occur. The recommended relative humidity during
operation is 20%-80%.
■ Load media printing side down. The printing side of paper
is indicated on the paper wrapping.
Status Messages
Status messages in the message window provide information about
your printer and help you locate many problems. They are
displayed in order of importance. If a message is only one line long,
it can be displayed along with another message (with the highest
priority message on the top line). However, if either message is two
lines long, only the highest priority message is displayed.
When the condition associated with a displayed message has
changed, the message is cleared from the window and the next
highest priority message is then displayed. Status messages are not
displayed while the printer is off line.
NOTE: A service message sometimes occurs as a result of an
unusual combination of events, not because of an actual
problem. When the printer stops and a service message
displays in the message window, turn the printer off and
then back on. This often clears the service message
indicator and printer operation resumes. Always try this
before making a service call. Service calls should be
placed to the vendor from whom you purchased the
printer. If you cannot get service from your vendor, see
appendix D, “QMS Customer Support,” for more
information.
The following status messages may appear in the message window:
Chapter 9
9-2 Troubleshooting
Kommentare zu diesen Handbüchern